Bioactive Protein and Peptide Release from a Mucoadhesive Electrospun Membrane.

Protein-based biologics constitute a rapidly expanding category of therapeutic agents with high target specificity. Their clinical use has dramatically increased in recent years, but administration is largely via injection. Drug delivery across the oral mucosa is a promising alternative to injections, in order to avoid the gastrointestinal tract and first-pass metabolism. Current drug delivery formulations include liquid sprays, mucoadhesive tablets and films, which lack dose control in the presence of salivary flow. To address this, electrospun membranes that adhere tightly to the oral mucosa and release drugs locally have been developed. Here, we investigated the suitability of these mucoadhesive membranes for peptide or protein release. Bradykinin (0.1%) or insulin (1, 3, and 5%) were incorporated by electrospinning from ethanol/water mixtures. Immersion of membranes in buffer resulted in the rapid release of bradykinin, with a maximal release of 70 ± 12% reached after 1 h. In contrast, insulin was liberated more slowly, with 88 ± 11, 69.0 ± 5.4, and 63.9 ± 9.0% cumulative release of the total encapsulated dose after 8 h for membranes containing 1, 3, and 5% w/w insulin, respectively. Membrane-eluted bradykinin retained pharmacological activity by inducing rapid intracellular calcium release upon binding to its cell surface receptor on oral fibroblasts, when examined by flow cytometry. To quantify further, time-lapse confocal microscopy revealed that membrane-eluted bradykinin caused a 1.58 ± 0.16 fold-change in intracellular calcium fluorescence after 10 s compared to bradykinin solution (2.13 ± 0.21), relative to placebo. In conclusion, these data show that electrospun membranes may be highly effective vehicles for site-specific administration of biotherapeutic proteins or peptides directly to the oral mucosa for either local or systemic drug delivery applications.

Electrospinning polymersomes into bead-on-string polyethylene oxide fibres for the delivery of biopharmaceuticals to mucosal epithelia.

Fibrous mucoadhesive polymer membranes prepared using electrospinning demonstrate many advantages for mucosal drug delivery compared to other formulations. Previous electrospun membrane formulations have been developed mainly for the delivery of small molecule drugs. There remains great potential to further develop the technology for the delivery of vesicular vectors that allow administration of advanced therapeutic agents. However, there are no previous reports demonstrating the release of intact drug delivery vesicles from electrospun materials. Here, we describe incorporation and release of protein-loaded polymersomes from polyethylene oxide (PEO)-based electrospun membranes. Polymersomes comprising a copolymer of glycerol monomethacrylate (GMA) and hydroxypropyl methacrylate (HPMA) were prepared using polymerization-induced self-assembly and incorporated within PEO membranes using bead-on-string electrospinning at approximately 40 % w/w by polymer mass. Super-resolution fluorescence imaging showed that the vesicles remained intact and retained their encapsulated protein load within the fibre beads. Transmission electron microscopy and dynamic light scattering demonstrated that polymersomes retained their morphology following release from the polymer fibres. F(ab) antibody fragments were encapsulated within polymersomes and then electrospun into membranes. 78 ± 13 % of the F(ab) remained encapsulated within polymersomes during electrospinning and retained functionality when released from electrospun membranes, demonstrating that the formulation is suitable for the delivery of biologics. Membranes were non-irritant to the oral epithelium and fluorescence microscopy detected accumulation of polymersomes within the epithelia following application. This innovative drug delivery approach represents a novel and potentially highly useful method for the administration of large molecular mass therapeutic molecules to diseased mucosal sites.

Enhanced Antibacterial Ability of Electrospun PCL Scaffolds Incorporating ZnO Nanowires.

The infection of implanted biomaterial scaffolds presents a major challenge. Existing therapeutic solutions, such as antibiotic treatment and silver nanoparticle-containing scaffolds are becoming increasingly impractical because of the growth of antibiotic resistance and the toxicity of silver nanoparticles. We present here a novel concept to overcome these limitations, an electrospun polycaprolactone (PCL) scaffold functionalised with zinc oxide nanowires (ZnO NWs). This study assessed the antibacterial capabilities and biocompatibility of PCL/ZnO scaffolds. The fabricated scaffolds were characterised by SEM and EDX, which showed that the ZnO NWs were successfully incorporated and distributed in the electrospun PCL scaffolds. The antibacterial properties were investigated by co-culturing PCL/ZnO scaffolds with Staphylococcus aureus. Bacterial colonisation was reduced to 51.3% compared to a PCL-only scaffold. The biocompatibility of the PCL/ZnO scaffolds was assessed by culturing them with HaCaT cells. The PCL scaffolds exhibited no changes in cell metabolic activity with the addition of the ZnO nanowires. The antibacterial and biocompatibility properties make PCL/ZnO a good choice for implanted scaffolds, and this work lays a foundation for ZnO NWs-infused PCL scaffolds in the potential clinical application of tissue engineering.

Electrospun patch delivery of anti-TNFα F(ab) for the treatment of inflammatory oral mucosal disease.

Chronic ulcerative oral mucosal inflammatory diseases, including oral lichen planus and recurrent aphthous stomatitis, are painful and highly prevalent, yet lack effective clinical management. In recent years, systemic biologic therapies, including monoclonal antibodies that block the activity of cytokines, have been increasingly used to treat a range of immune-mediated inflammatory conditions such as rheumatoid arthritis and psoriasis. The ability to deliver similar therapeutic agents locally to the oral epithelium could radically alter treatment options for oral mucosal inflammatory diseases, where pro-inflammatory cytokines, in particular tumour-necrosis factor-α (TNFα), are major drivers of pathogenesis. To address this, an electrospun dual-layer mucoadhesive patch comprising medical-grade polymers was investigated for the delivery of F(ab) biologics to the oral mucosa. A fluorescent-labelled F(ab) was incorporated into mucoadhesive membranes using electrospinning with 97% v/v ethanol as a solvent. The F(ab) was detected within the fibres in aggregates when visualised by confocal microscopy. Biotinylated F(ab) was rapidly eluted from the patch (97 ± 5% released within 3 h) without loss of antigen-binding activity. Patches applied to oral epithelium models successfully delivered the F(ab), with fluorescent F(ab) observed within the tissue and 5.1 ± 1.5% cumulative transepithelial permeation reached after 9 h. Neutralising anti-TNFα F(ab) fragments were generated from whole IgG by papain cleavage, as confirmed by SDS-PAGE, then incorporated into patches. F(ab)-containing patches had TNFα neutralising activity, as shown by the suppression of TNFα-mediated CXCL8 release from oral keratinocytes cultured as monolayers. Patches were applied to lipopolysaccharide-stimulated immune-competent oral mucosal ulcer equivalents that contained primary macrophages. Anti-TNFα patch treatment led to reduced levels of active TNFα along with a reduction in the levels of disease-implicated T-cell chemokines (CCL3, CCL5, and CXCL10) to baseline concentrations. This is the first report of an effective device for the delivery of antibody-based biologics to the oral mucosa, enabling the future development of new therapeutic strategies to treat painful conditions.

The safety and biocompatibility of direct aesthetic restorative materials.

Restorative dental materials are among the most important medical devices in terms of the numbers of patients who benefit and the technical sophistication of the products. Many though contain toxic or noxious substances, including potentially sensitising resin monomers, photoinitiators, acidic polymers and glass or ceramic filler particles. Despite this, dental materials are among the safest medical devices in use today, with very few reports of adverse reactions or injuries among both patients or the dental team. This paper considers the potential for adverse reactions to dental materials, current evidence for harm and finally examines the reasons why in real-world clinical use the likelihood of an adverse event is extremely low. Medical devices regulations, responsible manufacture and clinical vigilance all appear to play important roles in ensuring that dental materials do not cause or present a risk to patients. While this excellent in-practice safety record is welcome, there is now increasing interest in the 'macro' scale biocompatibility of dental materials and their packaging in the environment, subjects that have been relatively neglected until recently. It was concluded that this should be a priority for future research and development and support is needed from governments alongside the manufacturing industry and the profession.

Resin-based composite materials: elution and pollution.

Pollution arises from all human activity and the provision of oral healthcare using resin-based composite restorative materials (RBCs) should be considered. This paper aims to provide a comprehensive review of the potential pollutant risk to the environment from the chemical compounds found in resin-based restorative materials, by including: 1) the principal pollutant compounds present in the resin matrix; 2) the degradation process of RBCs and its consequences; 3) the methods used for the detection and quantification of monomer elution and RBC microparticles; and 4) a review of the release mechanisms of eluates and RBC microparticles into the environment.RBCs are pollutants by virtue of the compounds created during the degradation processes. These are in the form of the constituent eluted monomers and microparticles. Their impact on the environment and biodiversity is unknown. These materials are currently one of the main direct-placement restorative materials and their success is unquestionable when used and maintained correctly. Mitigation strategies for reducing the impact of pollution on the environment should be considered and implemented by all stakeholders and processes in the supply chain, from manufacturing, clinical use and waste management.

Stimulation of Metabolic Activity and Cell Differentiation in Osteoblastic and Human Mesenchymal Stem Cells by a Nanohydroxyapatite Paste Bone Graft Substitute.

Advances in nanotechnology have been exploited to develop new biomaterials including nanocrystalline hydroxyapatite (nHA) with physical properties close to those of natural bone mineral. While clinical data are encouraging, relatively little is understood regarding bone cells' interactions with synthetic graft substitutes based on this technology. The aim of this research was therefore to investigate the in vitro response of both osteoblast cell lines and primary osteoblasts to an nHA paste. Cellular metabolic activity was assessed using the cell viability reagent PrestoBlue and quantitative, real-time PCR was used to determine gene expression related to osteogenic differentiation. A potential role of calcium-sensing receptor (CaSR) in the response of osteoblastic cells to nHA was also investigated. Indirect contact of the nHA paste with human osteoblastic cells (Saos-2, MG63, primary osteoblasts) and human bone marrow-derived mesenchymal stem cells enhanced the cell metabolic activity. The nHA paste also stimulated gene expression of runt-related transcription factor 2, collagen 1, alkaline phosphatase, and osteocalcin, thereby indicating an osteogenic response. CaSR was not involved in nHA paste-induced increases in cellular metabolic activity. This investigation demonstrated that the nHA paste has osteogenic properties that contribute to clinical efficacy when employed as an injectable bone graft substitute.

Quantification of single use plastics waste generated in clinical dental practice and hospital settings.

OBJECTIVES: To quantify (by number and mass) single use plastic waste generated from the provision of oral healthcare in primary and secondary care clinical dental settings in the UK. METHODS: An observational study of four dental practices and the clinics of a UK undergraduate dental teaching hospital was conducted. A range of routine common procedures were observed by trained and calibrated observers; these were: Examinations, endodontics, periodontics, direct placement restorations, fixed and removable prosthodontics and oral surgery. The PPE items used before and during the COVID-19 pandemic were also included. RESULTS: Routine 'surgery set up' generic items present a significant proportion of SUP plastic waste as these are used in every instance of patient treatment. An average of twenty-one (n = 21) SUP plastic waste items are used for every procedure with a mean mass of 354 g per procedure (including set up and clean up). The use of PPE increased from 14 items (pre-COVID -19) to 19 items during the pandemic. SUP items are constructed from a single plastic or from multiple plastics forming compound structures (heteropolymers); with an approximate 50:50 distribution. CONCLUSIONS: The dental profession, at the point of care, uses a high volume of single use plastic that becomes clinical waste. The use of personal protective equipment (PPE) significantly increased during the COVID 19 pandemic and this accounts for the single greatest contribution of single use plastic, as this is used for every clinical procedure. CLINICAL SIGNIFICANCE: Manufacturers, distributors and oral healthcare providers have an opportunity to consider and implement approaches that include effective waste management with reduction, recovery and recycling at its core, towards transforming oral healthcare to a circular plastics economy.

Nanoscale Strontium-Substituted Hydroxyapatite Pastes and Gels for Bone Tissue Regeneration.

Injectable nanoscale hydroxyapatite (nHA) systems are highly promising biomaterials to address clinical needs in bone tissue regeneration, due to their excellent biocompatibility, bioinspired nature, and ability to be delivered in a minimally invasive manner. Bulk strontium-substituted hydroxyapatite (SrHA) is reported to encourage bone tissue growth by stimulating bone deposition and reducing bone resorption, but there are no detailed reports describing the preparation of a systematic substitution up to 100% at the nanoscale. The aim of this work was therefore to fabricate systematic series (0-100 atomic% Sr) of SrHA pastes and gels using two different rapid-mixing methodological approaches, wet precipitation and sol-gel. The full range of nanoscale SrHA materials were successfully prepared using both methods, with a measured substitution very close to the calculated amounts. As anticipated, the SrHA samples showed increased radiopacity, a beneficial property to aid in vivo or clinical monitoring of the material in situ over time. For indirect methods, the greatest cell viabilities were observed for the 100% substituted SrHA paste and gel, while direct viability results were most likely influenced by material disaggregation in the tissue culture media. It was concluded that nanoscale SrHAs were superior biomaterials for applications in bone surgery, due to increased radiopacity and improved biocompatibility.

The antimicrobial activity and biocompatibility of a controlled gentamicin-releasing single-layer sol-gel coating on hydroxyapatite-coated titanium.

AIMS: The aim of this study was to develop a single-layer hybrid organic-inorganic sol-gel coating that is capable of a controlled antibiotic release for cementless hydroxyapatite (HA)-coated titanium orthopaedic prostheses. METHODS: Coatings containing gentamicin at a concentration of 1.25% weight/volume (wt/vol), similar to that found in commercially available antibiotic-loaded bone cement, were prepared and tested in the laboratory for: kinetics of antibiotic release; activity against planktonic and biofilm bacterial cultures; biocompatibility with cultured mammalian cells; and physical bonding to the material (n = 3 in all tests). The sol-gel coatings and controls were then tested in vivo in a small animal healing model (four materials tested; n = 6 per material), and applied to the surface of commercially pure HA-coated titanium rods. RESULTS: The coating released gentamicin at > 10 × minimum inhibitory concentration (MIC) for sensitive staphylococcal strains within one hour thereby potentially giving effective prophylaxis for arthroplasty surgery, and showed > 99% elution of the antibiotic within the coating after 48 hours. There was total eradication of both planktonic bacteria and established bacterial biofilms of a panel of clinically relevant staphylococci. Mesenchymal stem cells adhered to the coated surfaces and differentiated towards osteoblasts, depositing calcium and expressing the bone marker protein, osteopontin. In the in vivo small animal bone healing model, the antibiotic sol-gel coated titanium (Ti)/HA rod led to osseointegration equivalent to that of the conventional HA-coated surface. CONCLUSION: In this study we report a new sol-gel technology that can release gentamicin from a bioceramic-coated cementless arthroplasty material. In vitro, local gentamicin levels are in excess of what can be achieved by antibiotic-loaded bone cement. In vivo, bone healing in an animal model is not impaired. This, thus, represents a biomaterial modification that may have the potential to protect at-risk patients from implant-related deep infection. Cite this article: Bone Joint J 2021;103-B(3):522-529.

Electrospun Scaffolds Containing Silver-Doped Hydroxyapatite with Antimicrobial Properties for Applications in Orthopedic and Dental Bone Surgery.

Preventing the development of osteomyelitis while enhancing bone regeneration is challenging, with relatively little progress to date in translating promising technologies to the clinic. Nanoscale hydroxyapatite (nHA) has been employed as a bone graft substitute, and recent work has shown that it may be modified with silver to introduce antimicrobial activity against known pathogens. The aim of this study was to incorporate silver-doped nHA into electrospun scaffolds for applications in bone repair. Silver-doped nHA was produced using a modified, rapid mixing, wet precipitation method at 2, 5, 10 mol.% silver. The silver-doped nHA was added at 20 wt.% to a polycaprolactone solution for electrospinning. Bacteria studies demonstrated reduced bacterial presence, with Escherichia coli and Staphylococcus aureus undetectable after 96 h of exposure. Mesenchymal stem cells (MSCs) were used to study both toxicity and osteogenicity of the scaffolds using PrestoBlue® and alkaline phosphatase (ALP) assays. Innovative silver nHA scaffolds significantly reduced E. coli and S. aureus bacterial populations while maintaining cytocompatibility with mammalian cells and enhancing the differentiation of MSCs into osteoblasts. It was concluded that silver-doped nHA containing scaffolds have the potential to act as an antimicrobial device while supporting bone tissue healing for applications in orthopedic and dental bone surgery.

Medium-Chain Fatty Acids Released from Polymeric Electrospun Patches Inhibit Candida albicans Growth and Reduce the Biofilm Viability.

Oral candidiasis is a very common oral condition among susceptible individuals, with the main causative organism being the fungus Candida albicans. Current drug delivery systems to the oral mucosa are often ineffective because of short drug/tissue contact times as well as increased prevalence of drug-resistant Candida strains. We evaluated the potency of saturated fatty acids as antifungal agents and investigated their delivery by novel electrospun mucoadhesive oral patches using agar disk diffusion and biofilm assays. Octanoic (C8) and nonanoic (C9) acids were the most effective at inhibiting C. albicans growth on disk diffusion assays, both in solution or when released from polycaprolactone (PCL) or polyvinylpyrrolidone/RS100 (PVP/RS100) electrospun patches. In contrast, dodecanoic acid (C12) displayed the most potent antifungal activity against pre-existing C. albicans biofilms in solution or when released by PCL or PVP/RS100 patches. Both free and patch-released saturated fatty acids displayed a significant toxicity to wild-type and azole-resistant strains of C. albicans. These data not only provide evidence that certain saturated fatty acids have the potential to be used as antifungal agents but also demonstrate that this therapy could be delivered directly to Candida-infected sites using electrospun mucoadhesive patches, demonstrating a potential new therapeutic approach to treat oral thrush.

Mucoadhesive Electrospun Fibre-Based Technologies for Oral Medicine.

Oral disease greatly affects quality of life, as the mouth is required for a wide range of activities including speech, food and liquid consumption. Treatment of oral disease is greatly limited by the dose forms that are currently available, which suffer from short contact times, poor site specificity, and sensitivity to mechanical stimulation. Mucoadhesive devices prepared using electrospinning offer the potential to address these challenges by allowing unidirectional site-specific drug delivery through intimate contact with the mucosa and with high surface areas to facilitate drug release. This review will discuss the range of electrospun mucoadhesive devices that have recently been reported to address oral inflammatory diseases, pain relief, and infections, as well as new treatments that are likely to be enabled by this technology in the future.

Incorporation of lysozyme into a mucoadhesive electrospun patch for rapid protein delivery to the oral mucosa.

The delivery of biopharmaceuticals to the oral mucosa offers a range of potential applications including antimicrobial peptides to treat resistant infections, growth factors for tissue regeneration, or as an alternative to injections for systemic delivery. Existing formulations targeting this site are typically non-specific and provide little control over dose. To address this, an electrospun dual-layer mucoadhesive patch was investigated for protein delivery to the oral mucosa. Lysozyme was used as a model antimicrobial protein and incorporated into poly(vinylpyrrolidone)/Eudragit RS100 polymer nanofibers using electrospinning from an ethanol/water mixture. The resulting fibrous membranes released the protein at a clinically desirable rate, reaching 90 ± 13% cumulative release after 2 h. Dual fluorescent fibre labelling and confocal microscopy demonstrated the homogeneity of lysozyme and polymer distribution. High encapsulation efficiency and preservation of enzyme activity were achieved (93.4 ± 7.0% and 96.1 ± 3.3% respectively). The released lysozyme inhibited the growth of the oral bacterium Streptococcus ratti, providing further evidence of retention of biological activity and illustrating a potential application for treating and preventing oral infections. An additional protective poly(caprolactone) backing layer was introduced to promote unidirectional delivery, without loss of enzyme activity, and the resulting dual-layer patches displayed long residence times using an in vitro test, showing that the adhesive properties were maintained. This study demonstrates that the drug delivery system has great potential for the delivery of therapeutic proteins to the oral mucosa.

Determination of Polyetheretherketone (PEEK) mechanical properties as a denture material.

PURPOSE: To optimize the gypsum mold temperatures for pressed PEEK, and to estimate the impact, tensile strength and flexural properties of pressed and milled PEEK. Where appropriate, these properties were compared with those of PMMA. MATERIALS AND METHODS: Since the mold temperature could affect the properties of the injected parts, the temperature of 20 gypsum specimens was monitored using the multi-thermocouple system (n = 5). A total of 210 specimens were prepared for mechanical tests according to the ISO standard for denture base polymer (n = 10). The Izod impact, tensile strength, and flexural behavior were assessed. PEEK-OptimaNI1 (PEEK-pressed) was tested after processing via the pressing method at4 different mold temperatures. Machining PEEK-Juvora (PEEK-milled) specimens were prepared using the CAD-CAM production method. Data were analyzed via one-way ANOVA performed at a confidence level of 95% and a significant P-value of (P ≤ 0.05). RESULTS: In comparison to the furnace temperature more heat was required to preheat the gypsum mold up to 100, 150, 175 and 200 °C for pressing purposes. The highest impact strength was 5.7 kJ/m2 for PEEK-pressed at 100 °C mold temperature and 4 kJ/m2 for PEEK-milled. The latter had a higher tensile strength of 118 MPa. The best result for PEEK-pressed was 97 MPa at 200 °C mold temperature. Under a 4-point bending test, Young's modulus of PEEK-milled was 5591 MPa, while the highest for PEEK-pressed was 4936 MPa at 200 °C mold temperature. CONCLUSIONS: Compared to PMMA, given the superior mechanical properties of PEEK, it may become the material of choice for future use. Dentures constructed from PEEK polymer could well be routinely constructed in the near future.

Mucoadhesive Electrospun Patch Delivery of Lidocaine to the Oral Mucosa and Investigation of Spatial Distribution in a Tissue Using MALDI-Mass Spectrometry Imaging.

Many oral mucosal conditions cause considerable and prolonged pain that to date has been difficult to alleviate via topical delivery, and the use of injection causes many patients dental anxiety and needle-prick pain. Therefore, developing a noninjectable drug delivery system as an alternative administration procedure may vastly improve the health and wellbeing of these patients. Recent advances in the development of mucoadhesive electrospun patches for the direct delivery of therapeutics to the oral mucosa offer a potential solution, but as yet, the release of local anesthetics from this system and their uptake by oral tissue have not been demonstrated. Here, we demonstrate the fabrication of lidocaine-loaded electrospun fiber patches, drug release, and subsequent uptake and permeation through the porcine buccal mucosa. Lidocaine HCl and lidocaine base were incorporated into the electrospun patches to evaluate the difference in drug permeation for the two drug compositions. Lidocaine released from the lidocaine HCl-containing electrospun patches was significantly quicker than from the lidocaine base patches, with double the amount of drug released from the lidocaine HCl patches in the first 15 min (0.16 ± 0.04 mg) compared to that from the lidocaine base patches (0.07 ± 0.01 mg). The permeation of lidocaine from the lidocaine HCl electrospun patches through ex vivo porcine buccal mucosa was also detected in 15 min, whereas permeation of lidocaine from the lidocaine base patch was not detected. Matrix-assisted laser desorption ionization-mass spectrometry imaging was used to investigate localization of lidocaine within the oral tissue. Lidocaine in the solution as well as from the mucoadhesive patch penetrated into the buccal mucosal tissue in a time-dependent manner and was detectable in the lamina propria after only 15 min. Moreover, the lidocaine released from lidocaine HCl electrospun patches retained biological activity, inhibiting veratridine-mediated opening of voltage-gated sodium channels in SH-SY5Y neuroblastoma cells. These data suggest that a mucoadhesive electrospun patch may be used as a vehicle for rapid uptake and sustained anesthetic drug delivery to treat or prevent oral pain.

In vivo safety and efficacy testing of a thermally triggered injectable hydrogel scaffold for bone regeneration and augmentation in a rat model.

Bone loss resulting from degenerative diseases and trauma is a significant clinical burden which is likely to grow exponentially with the aging population. In a number of conditions where pre-formed materials are clinically inappropriate an injectable bone forming hydrogel could be beneficial. The development of an injectable hydrogel to stimulate bone repair and regeneration would have broad clinical impact and economic benefit in a variety of orthopedic clinical applications. We have previously reported the development of a Laponite® crosslinked pNIPAM-co-DMAc (L-pNIPAM-co-DMAc) hydrogel delivery system, loaded with hydroxyapatite nanoparticles (HAPna), which was capable of inducing osteogenic differentiation of mesenchymal stem cells (MSCs) without the need for additional growth factors in vitro. However to enable progression towards clinical acceptability, biocompatibility and efficacy of the L-pNIPAM-co-DMAc hydrogel to induce bone repair in vivo must be determined. Biocompatibility was evaluated by subcutaneous implantation for 6 weeks in rats, and efficacy to augment bone repair was evaluated within a rat femur defect model for 4 weeks. No inflammatory reactions, organ toxicity or systemic toxicity were observed. In young male rats where hydrogel was injected, defect healing was less effective than sham operated controls when rat MSCs were incorporated. Enhanced bone healing was observed however, in aged exbreeder female rats where acellular hydrogel was injected, with increased deposition of collagen type I and Runx2. Integration of the hydrogel with surrounding bone was observed without the need for delivered MSCs; native cell infiltration was also seen and bone formation was observed within all hydrogel systems investigated. This hydrogel can be delivered directly into the target site, is biocompatible, promotes increased bone formation and facilitates migration of cells to promote integration with surrounding bone, for safe and efficacious bone repair.

Electrospun F18 Bioactive Glass/PCL-Poly (ε-caprolactone)-Membrane for Guided Tissue Regeneration.

Barrier membranes that are used for guided tissue regeneration (GTR) therapy usually lack bioactivity and the capability to promote new bone tissue formation. However, the incorporation of an osteogenic agent into polymeric membranes seems to be the most assertive strategy to enhance their regenerative potential. Here, the manufacturing of composite electrospun membranes made of poly (ε-caprolactone) (PCL) and particles of a novel bioactive glass composition (F18) is described. The membranes were mechanically and biologically tested with tensile strength tests and tissue culture with MG-63 osteoblast-like cell line, respectively. The PCL-F18 composite membranes demonstrated no increased cytotoxicity and an enhanced osteogenic potential when compared to pure PCL membranes. Moreover, the addition of the bioactive phase increased the membrane tensile strength. These preliminary results suggested that these new membranes can be a strong candidate for small bone injuries treatment by GTR technique.

The Effect of RANKL/OPG Balance on Reducing Implant Complications.

Despite the phenomenal success of implants particularly in the realms of dentistry and orthopaedics, there are still challenges to overcome. The failure of implants resulting from infection, prosthetic loosening, and non-union continue to be the most notorious examples. The cascade of fracture healing and bone repair, especially with the presence of an implant, is complex because it involves a multifaceted immune response alongside the intricate process of bone formation and remodelling. Bone loss is a serious clinical problem that is frequently accompanied by chronic inflammation, illustrating that there is a convoluted relationship between inflammation and bone erosion. The effects of pro-inflammatory factors play a significant role in initiating and maintaining osteoclastogenesis that results in bone resorption by osteoclasts. This is because there is a disruption of the relative ratio between Receptor Activator of Nuclear Factor κB-Ligand (RANKL) and osteoprotegerin (OPG), which is central to modulating bone repair and remodelling. This review aims to provide a background to the bone remodelling process, the bone repair cascade post-implantation, and the associated complications. Furthermore, current clinical solutions that can influence bone formation via either internal or extrinsic mechanisms will be described. These efficacious treatments for osteolysis via targeting the RANKL/OPG ratio may be crucial to reducing the incidence of related implant failures in the future.